Eventually would like to try a full t-shirt print - I have a 15 x 15 press and I made a carboard support for the t-shirt so that I can print at least the 13 x 19 print on a t-shirt - but I went with something almost 20 " wide and 24" long . I created using word for the size I wanted - then used something called Posterazor that splits up the lage image to print on multiple sheets of 8-1/2 x 11 with overlay so you can piece them together - with the sublimation - you wont get lines when you print if matched correctly
So I printed using various sizes 8-1/2 x 11 and 11 x 17 - was pretty easy for that part - when it came to pressing that was the challenge to manipulate that huge piece of cardboard around as you pressed
assembly using heat tape - had to do some trimming to make the pattern match but lots of overlay to work with 
fully assembled (I think 6 sheets ) 
after pressing - was really happy 
The portable laser cleaner is used in this processing.
ReplyDelete