Microfold Earrings - copper - preparation

I am still putting together the video but I thought I'd post the step by step

I purchased a roll of 36 ga copper sheet -This thin copper can be used for embossing, punching, rubbing and decorating.I have found it packaged in rolls, metal foil can be cut to size with household scissors. Gauge: 36ga. - .005” thick. Curry's arts stores have it in Canada and Dick Blick has it in the USA.

I do use my regular scissors to cut and the 36ga lends it self to not have to be annealed once it is worked  and is still easy to use after microfolding through the brake or the tube wringer.

Equipment to assemble:
Scissors
Ruler
Pencil or pen
tube wringer (see image in below post)  or microfold brake
flat nose pliers - smallest you can find with thin tips - helps in "confirming" the folds
36ga copper sheet  (2.0 inches x 2.5" min)

Once you have all this we can start

Whats Next

As I'm working on my studio I sit and play with items like microfolding,(instructions coming - have taken pics - just have to do the video portion)  thinking of new glass beads, fusing, updating my website and lastly my resin.  Have not worked on it in weeks and need to make some more samples and make some jewelry - bought some oomoo silicone molding materials to make bangle bracelets about a year ago  and want to create transparencies to insert into the resins.  so as I play I will take pics and put them into the blog for samples.

I have to finish my vent hood, decided I just could not trust it hanging from ceiling - seems strong but I decide to put 4x4 corner posts and 2x4 to support it -finished that portion last night -  will also give me space to create some shelves to put all my craft videos .  This means I am rebuilding my torch table as well so I'll have that done this week and take pics.

Attempted to install the fan motor and realized I'm going to have to suspend it from ceiling to take the weight from the top of the hood - it will support but better to be safe than sorry.

I figure that I'll be done by the weekend. And start to torch again at least

Cleaned my desk area and brought my computer and printers back up so I can surf and print.

Of course all of this is not without an accident - was holding a 4 x 4 for one of the corners - I had a 6 ft 2x4 propped against a table and it came chopping down and hit the top part of my foot so it was a trip to the hospital for an x-ray - good news just a crack and its black and blue and a bit sore (amazing thought I'd be limping for days)

will have some pics shortly

Microfolding

Just playing around with thin gauge copper (36g) getting back into the swing of things- Microfolding - took a class with Jack Berry back in 2004-  and will make some silver fan earings on the weekend - I'll do a demo video of how to make the earrings this weekend and post it on my website and the blog side video bar.

Real easy - I have the bonny doon microfold brake but you can get a a paint tube wringer and do the same not expensive and can be found at craft stores.

Best laid plans....

I have been planning and working towards a group of good crafty  friends coming up on the 18th but things do not always work out the way you want.  Anything to do with crafts is always wonderful and I was so looking forward to them visiting and seeing my studio.  In the last month or so, new sliding door, deck, cleaned major corner area, insulated and set up tables, made new work table, fridge, lighting, new exhaust hood - so pleased with the results.

O well will have to reschedule, not like it goes to waste - got a lot done in  a short period of time

Will just have to have a fun day in July


Been playing with some copper sheet -  pulled out my instructions for microfolding and playing on my new work table when I can.  will post some pics shortly

Enamelling center

I reworked my enamelling center for copper enamelling, and torch enamelling along with my kiln table with enamel kilns, PMC kiln

Organizing my studio - Left corner

New work table, my wood pen turning area, my solder station and electroplating/etching plating center- this area is organized now - I have to start on my desk area since everything was ending up over there from cleaning this area up .

Like I had nothing else to do ......

I built a small deck outside the sliding door to my studio so that it was easier to step in
Was not like I had anything else to do all weekend, cut the grass, clean the pool, fix a hole in the pool, clean the house -  Its much more fun doing something for the studio

arranging my things - setting up my tables etc. putting together the ventilation system (not in but almost )
I have all the parts - I just need to clear the area by my desk so I can get up to the roof and hand chain to support the venting

Pic of my new deck area so I can sit outside my studio (also created a play area for my granddaughter)