I ordered on the 14th of July and received it on July 24th - WOW fast delivery
The concept is to use to close jump rings
Here she is set up
was pretty simple - foot pedal fit in only one spot - the black anode attached to blacik tweezer only in one place same for the red anode
the tungsten rod fit into the red anode end and the plastick stand was pretty self explanitory
the only thing I had to look up was what to set the settings too - in this case 5 for both dials
I did find some instructions on line at another dealer
so I fitted some jump rings together - they need to be tight as the spot weld is tiny - although if you want a bigger spot just turn over the tungsten rod to the flat large end and you get a big whopping weld
So all ready - says not to look at the light (dont go into the light ) as it can harm your eyes -
Now try holding it in place and doing that - so I ordered welders glasses from amazon right away
So now I have the glasses
such a fasion statement
I use magnifying glasses too to help with actually seeing the line I have to weld
Now all ready
I do some more jump rings up holding them in the tweezer and holding it very close to the tungsten tip (too close and it sticks to the rod - not a big deal just have to work it off ) at same time you press down on the foot pedal - one quick step - never leave your foot on it as you will burn out your unit -
I jusmp still at the flash - its quick and there is a weld - wow
I sort of did it 3 times but the first weld did hold - so it works great - the jump rings can go into the tumbler and it will take away the discoloration
Next I will see if I can spot weld a backing pin onto something and see how that works
