Etching Copper Pipe and Blanks with Zentangle Stamp

I decided to use my zentangle stamp and copper pipe for etching
(stamps are available at my etsy store  - check out left side of blog )

I found that cutting to size before rolling was harder - so I found leaving ends long enough to hold while rolling made it easier

I put a magazine under the stamp so it gave it some flexibility 

Once completed I let dry and then cut the ends off 
I prepped the stamp 

I placed the blanks onto the stamp and then removed and let it dry

Put into the etch 
Once etched I punched holes as these are going to be earrings 
I decided I did not want just flat earrings but rolled

Using a swage tool 


I started at the largest 

bent the earrings to the angles I wanted 



I found a really great sealer - its thin enough to dip and to apply and spray - really impressed with the bracelets I did with them (I'll have to post those seperately)
I did liver of sulpher and cleaned up the earrings and dipped them 
they dry very quickly 


going to have to play with pipe some more - enamelling -   I've been wanting to etch copper pipe and make beads and enamel them - so that is almost close to happening 


ALSO CHECK OUT PNP BLUE AND COPPER PIPE THREAD 


AND 
ETCHING COPPER PIPE 






18 comments:

  1. Combining zentangles and cold connections? Sign me up! Cool stamps! Please tell me more about the swage tool. That's a new one for me. Looks interesting!

    ReplyDelete
  2. Metalliferous carries the exact same bending block as the one I have
    http://store.metalliferous.com/prodinfo.asp?number=PE264.00

    ReplyDelete
  3. Who makes the zetangle stamp? LOVEEE it! Rockin Robin
    stampinsavage@yahoo.com

    ReplyDelete
  4. I make the stamp - available on etsy - 3 patterns to choose from

    ReplyDelete
  5. I am missing something... you rolled the pipe in etching, cut the ends off, and the next pic is the blanks. Did you cut the blanks out of the pipe? I'm asking because I would like to try this but my brain is not comprehending the full procedure.

    ReplyDelete
    Replies
    1. My thoughts too- fantastic technique- but what happened to the pipe? I wanna seeeee!

      Delete
    2. I rolled the pipe on the rubber stamp that had staz on - used it as a resist
      there is another blog thread that shows how
      http://deborahreadcom.blogspot.ca/2012/07/etching-copper-pipe.html

      Delete
    3. I love all of your ideas and creativity. I have just started working with copper tubing. Besides the patina, I would love to try your methods At times plain is okay, but these are spectacular. ty for sharing.

      Delete
  6. Pipe got etched next day - seperate blog thread on the pipe

    ReplyDelete
  7. then what did you do with the pipe?

    ReplyDelete
  8. was making into capped end beads but still a work in progress

    ReplyDelete
  9. was making into capped end beads but still a work in progress

    ReplyDelete
  10. The blog was so impressive and informative to me. I would like to thank the writer for this amazing effort for the audience. ultrasonic hot and cold facial massager

    ReplyDelete
  11. This blog is especially useful for providing complete aspects and clarity. if you want to buy high-quality copper pipe and tube visit Copper Tube Manufacturer

    ReplyDelete
  12. MRS Agencies is a Best Pure Copper Earthing Electrode Manufacturers in India. These are manufactured with modern technology and high grade raw material to provide unmatched quality. We are giving this electrode in diverse specifications as per customers’ requirements. This electrode gives leak-proof high conductivity and protection. Also this product is avail Copper Bonded Chemical Earthing Electrode, Chemical Earthing/ Gel Earthing Electrode to our clients at best rates.

    ReplyDelete
  13. Well, this was an awesome tour to your adorable blog resource world. I was really delighted finding so much metal and copper designing projects. That's extremely enriched my knowledge. The details about etching copper pipe and blanks with zentangle stamp was completely admirable. And the images you inserted were also beautiful. I like the way you explained all the processes. Anyway, if any readers here would like to learn about pipe bending, I would like to recommend to take a tour to https://chittak-laser.com/product-category/pipe-bending-machine/. Chittak’s pipe bending machines can bend various metal materials including brass, copper, carbon steel, stainless steel, aluminum and various alloy materials. From simple curves to more complex constructions such as U-bend and S-bend, whatever shape you want to bend the pipe into, their pipe bending machines can meet your production needs. Maybe it's really useful to some guys here.

    ReplyDelete