More- etched copper with PnP Circuit Board Transfer Film

I did etch more items on the weekend but I just cleaned the PnP blue off tonight before really cleaning them up
You can rub and scrub it off with steel wool but its easier if you use a paint thinner  - in my case I used some acetone I have for other reasons. Got it at Home Depot

These items are just cleaned with the acetone for now and then I will clean them up before I use them
The PnP gives a really nice crisp line I can count on when etching.

The round ones are calling for a center punch and add ons.

 The tree of life I think I'll put some holes at the bottom and put some things to dangle